Scientific Program
LIST OF PRESENTATIONS
|
||
Hall A - Opening Session |
||
8.00 – 8.30 | Registration | |
8.30– 9.00 | Opening Session and Welcome Hülya Gedik, Chair of the Board of the Trustees, İstanbul Gedik University Prof. Dr. Ahmet Kesik, Rector of İstanbul Gedik University Prof. Dr. Mustafa Koçak, Chair WAM 2023 International Conference |
|
9.00– 9.30 | Keynote Lecture Wire + Arc Additive Manufacture (WAAM) Qualification – The Last Remaining Challenge for Widespread Industrial Applications? Stewart Williams, Cranfield University, UK (INVITED LECTURE) |
|
9.30– 10.00 | Solid-State Joining of Additive Manufactured Metals for Lightweight Applications Sergio Amancio, Graz University of Technology, Austria IIW 2024 Halil Kaya Gedik Award Winner (INVITED LECTURE) |
|
10.00– 10.30 | COFFEE BREAK and POSTER SESSION | |
SESSION A1 Hall A - Advances in AM&WAAM Technologies - I Chair: Prof. Dr. Mustafa Koçak, İstanbul Gedik University, TÜRKİYE |
SESSION B1 Hall B - Advances in Welding Technologies Chair: Prof. Dr. Güney Güven Yapıcı, Özyeğin University, TÜRKİYE |
|
10.30– 11.00 | Towards a Digital Twin for Laser Metal Deposition Peter Mayr and Stephan Hartmann , Technical University of Munich, Germany (INVITED LECTURE) |
Factors Affecting Arc Stability in Tandem Pulsed GMA Welding Process Tomoyuki Ueyama, OTC Daihen, Japan (INVITED LECTURE) |
11.00– 11.30 | Fitness-forfor-Purpose Based Acceptance Criteria for Distributed Discontinuities in Metallic AM Components Pingsha Dong, University of Michigan, USA (INVITED LECTURE) |
Innovative Control of Robots for Manual Welding Application Shahram Sheikhi, Hamburg Technology University, Germany (INVITED LECTURE) |
11.30– 12.00 | Increasing LPBF Machines Availability By Using Machine Tool Design Principles Hashan Wijesundara, DMG MORI, Germany |
Potentials of Handheld Laser Beam Welding Simon Jahn, IFW Jena, Germany (INVITED LECTURE) |
12.00– 12.30 | Challenges in Welding of Additively Manufactured (WAAM and PBF LB) Aluminum Alloy Components Rafael Nunes, K. Faes, W. Verlinde, W. D. Waele, M. Lezaack, A. Simar, Belgian Welding Institute, Belgium (INVITED LECTURE) |
Innovative Welding Technologies for Enhancing Liquid Propulsion Systems Murat Yücel, ROKETSAN, Türkiye (INVITED LECTURE) |
12.30– 13.00 | Recent Developments on Aerospace Applications of DED Technologies Remzi Ecmel Ece, Turkish Aerospace Industries, Türkiye (INVITED LECTURE) |
Tailoring Laser Properties for Efficient Laser Based Manufacturing Danijela Rostohar, Coventry University, UK (INVITED LECTURE) |
13.00– 14.00 | LUNCH BREAK and POSTER SESSION | |
SESSION A2 Hall A - Design and Applications of AM&WAAM Technologies - I Chair: Prof. Dr. Savaş Dilibal, İstanbul Gedik University, TÜRKİYE |
SESSION B2 HALL B – Testing and Characterization - I Chair: Assoc. Prof. Ulaş Yaman, METU, TÜRKİYE |
|
14.00– 14.30 | Titanium Titans – The Remarkable World of Aircraft Manufacturing and the WAAM Evolution Sebastian Recke, GEFERTECH GmbH, Germany (INVITED LECTURE) |
Fracture Toughness Characterization of Welds by Using Mini-CT Specimens: FRACTESUS Project Findings Sergio Cicero González, University of Cantabria, Spain (INVITED LECTURE) |
14.30– 15.00 | Mechanical Properties of Wire Plus Arc Additive Manufactured Steel, Stainless Steel and Nickel Nickel-Based Superalloys and Potential Challenges in Defect Assessment Yin Jin Janin, The Welding Institute (TWI), UK (INVITED LECTURE) |
Severe Plastic Deformation for Post-Processing of Additive Additive-Manufactured Alloys Güney Güven Yapıcı, Özyeğin University, Türkiye (INVITED LECTURE) |
15.00– 15.30 | WAAM of Multi Multi-Material and Functionally Graded Structures and in in-Situ Alloy Development Using Multi Multi-Wire Mixing Jialuo Ding, WAAM3D, UK |
Insights into Grain Structure Formation During Friction Stir Welding/Processing of Metals and Alloys Akbar Heidarzadeh, M. Javidani, Rasoul Khajeh, Azarbaijan Shahid Madani University, Iran (INVITED LECTURE) |
15.30– 16.00 | Effect of Cooling Cycles on Microstructure Formation in Wire Arc Additive Manufacturing Ozan Can Ozaner, R. Talemi, T. Tjahjowidodo, A. Sharma, Katholieke Universiteit Leuven, Belgium (INVITED LECTURE) |
Sandwich Welding Design: Improving Ballistic Resistance of High Hardness Armor Steels Ceren Çelik, Uğur Gürol , İstanbul Gedik University , Türkiye |
16.00– 16.30 | COFFEE BREAK and POSTER SESSION | |
SESSION A3 Hall A - Design and Applications of AM&WAAM Technologies - II Chair: Dr. Remzi Ecmel Ece, TAI, Ankara, TÜRKİYE |
SESSION B3 HALL B – Testing and Characterization - II Chair: Dr. Ali İhsan Koruk, BOSAL Energy, Belgium |
|
16.30– 17.00 | Improving Printability of Large Directed Energy Deposition Components Alejandro Lázaro , Carretero, F., Olivieri, G. , Escobar, E. , Ramos, A., Robinson,C., MELTIO, Spain (INVITED LECTURE) |
Defense Industry Additive Manufacturing Roadmap Deniz Demirci, Secretariat of Defense Industries, Advanced Materials and Energy Program Manager, Türkiye (INVITED |
17.00– 17.30 | Keynote Lecture (ONLINE) Materials Design and Additive Manufacturing of Metal Matrix Composites Ju Li, Massachusetts Institute of Technology, USA (INVITED LECTURE) |
Recent Advances in the Manufacturing of Magnesium Components Using Directed Energy Deposition Techniques Gürel Çam, A. Günen, Iskenderun Technical University, Türkiye (INVITED LECTURE) |
17.30– 18.00 | A Multi -Laser Approach for In In-Situ Thermo Thermo-Mechanical Treatment of Metals and Alloys Huang Sheng, Massachusetts Institute of Technology, USA (INVITED LECTURE) |
Impact of Volumetric Energy Density on Mechanical Properties of Magnesium Alloy via Selective Laser Melting (ONLINE) Dhanesh G. Mohan, University of Sunderland, UK (INVITED LECTURE) |
18.00– 18.30 | Design and Applications on SLM-based Additive Manufacturing of Shape Memory Alloys (ONLINE) Mohammad Elahinia, University of Toledo, USA (INVITED LECTURE) |
Advanced In Situ Deformation Monitoring in Wire Arc Additive Manufacturing via Digital Image Correlation (ONLINE) Amir Kordijazi, A. Lanba, University of Southern Maine, USA Savaş Dilibal, Doruk Gürkan, İstanbul Gedik University |
22 November 2024 |
||
SESSION A4 Hall A - Advances in AM&WAAM Technologies - II Chair: Ozan Can Ozaner, KU Leuven, Belgium |
SESSION B4 HALL B – Properties of Welding and AM Parts - I Chair: Prof. Dr. Zuheir Barsoum, KTH Sweden |
|
8.30– 9.00 | Impact and Potential of In-Situ Monitoring on the Development of Metal Laser Powder Bed Fusion (L L-PBF) Technologies Aydın Yağmur, EOS GmbH, Additive Mind, Germany INVITED LECTURE) |
Local Approach for Fracture Assessment of Components with Heterogeneity of Mechanical Properties (ONLINE) Mitsuru Ohata, Osaka University, Japan (INVITED LECTURE) |
9.00– 9.30 | A New Method to Control Thermal Behavior of WAAM: Active Heating via Infrared Technology (ONLINE) Oğuzhan Yılmaz, Gazi University, Türkiye INVITED LECTURE) |
Engineering Assessment Procedure of the Local Thin Areas (LTA) in Welded Pipelines Fikri Başar Yalçıner, NMDC Group, Abu Dhabi Mustafa Koçak, İstanbul Gedik University, Türkiye |
9.30– 10.00 | Utilization of Additive Manufacturing Methods in the Energy and Emission Sectors Ali İhsan Koruk, BOSAL Energy, Belgium (INVITED LECTURE) |
Breaking the Boundaries of Additive Manufacturing: Additive Friction Stir Deposition Evren Yasa, University of Sheffield, UK (INVITED LECTURE) |
10.00– 10.30 | Additive Manufacturing and Biomedical Applications Binnur Sagbas, Yıldız Technical University, Türkiye (INVITED LECTURE) |
The Influence of Heat Input and Cooling Time on the Residual Stress During Wire Arc Additive Manufacturing Atilla Savaş, Piri Reis University, Türkiye |
10.30– 11.00 | COFFEE BREAK and POSTER SESSION | |
SESSION A5 HALL A – Additive Manufacturing Applications - I Chair: Assoc. Prof. Binnur Sagbas, Yıldız Technical University, Türkiye |
SESSION B5 HALL B– Properties of Welding and AM Parts - II Chair: Prof. Dr. Gürel Çam, İskenderun University, TÜRKİYE |
|
11.00– 11.30 | Purge Gas for Welding of Stainless-Steel Pipes: Must or Luxury Emel Taban, Kocaeli University, Türkiye (INVITED LECTURE) |
Application of Resistance Spot Welding in Cold-Formed Steel Structures Viorel Ungureanu , Ioan Both, J. Hulka, A. Popescu, S. Saraolu, A. A. Cristian, Politehnica University Timisoara, Romania |
11.30– 12.00 | Additive Manufacturing Designers: A Comparison Between IAMQS Professional Profiles and Relevant ISO Standards Pedro Catarino, EWF, Portugal (INVITED LECTURE) |
Effect of Filler Metals on Strength and Toughness of High Hardness Armor Steel Recep Murat Kurt, Uğur Gürol, Mustafa Koçak, İstanbul Gedik University, Türkiye and VESUVIUS, Türkiye, M. Tümer, Kocaeli University, Türkiye |
12.00– 12.30 | Overview of Laser Shock Peening Processing for Improvements of Metal Additive Manufactured Part at HiLASE Centre Sanin Zulic, Hilase Center, Czechia |
Potential of Process Gases for the WAAM to Increase Quality and Productivity Çerkez Kaya, Air Liquide Deutschland GmbH, Germany |
12.30– 13.00 | High-Speed Laser Laser-Directed Energy Deposition of Ti/Al Multi Multi-Material Component (ONLINE) Dongsheng Wu, H. Komen, M. Tanaka, Osaka University, Japan J. Sun, Z. Li, Shanghai Jiao Tong University, China |
Advanced Process Modeling and Simulation of Multi Multi-Material Directed Energy Deposition Emre Osmanoglu and Peter Mayr, Technical University of Munich, Germany |
13.00– 14.00 | LUNCH BREAK and POSTER SESSION | |
SESSION A6 HALL A – Additive Manufacturing Applications Applications-II Chair: Yin Jin Janin, TWI, UK |
SESSION B6 HALL B– Additive Manufacturing - I Chair: Akbar Heidarzadeh, Azarbaijan Shahid Madani University, Iran |
|
14.00– 14.30 | Understanding the Thermally Induced Martensitic Transformation in Nitinol Manufactured via Electron Beam Powder Bed Fusion Tymur Sabirov, A. Lanba, University of Maine, USA S. Dilibal, G. Peduk, İstanbul Gedik University Türkiye |
Design for Material Properties of Additively Manufactured Metals Using Topology Optimization Can Ayas, Delft University of Technology, The Netherlands (INVITED LECTURE) |
14.30– 15.00 | Material Selection & Development, and Metal Additive Manufacturing Process for AR/MR/VR Products Ustun Duman, Meta Platforms, California, USA (INVITED LECTURE) |
Development of Fast Fast-Paced Modular Microsatellite Production By AdditiveManufacturing Sertaç Altınok, Turkish Aerospace Ind. Company, Türkiye (INVITED LECTURE) |
15.00– 15.30 | Metal Additive Manufacturing and its Unique Corrosion Mechanisms (ONLINE) Iris De Graeve, Vrije Universiteit Brussel, Belgium (INVITED LECTURE) |
Enhancing Material Performance: Evaluating Shot Peening and Laser Peening Processes for Industrial Applications (INVITED LECTURE) Simge Gençalp, Manisa Celal Bayar University, Türkiye |
15.30– 16.00 | Determination Of Solid Particle Erosion Wear Behavior of Aircraft Turbine Blades Specific to Additive Manufacturing Orientation Effects Mehmet Esat Aydın, M. Demirci, M. Bağcı, Konya Technical University, Türkiye |
Metallic Additive Manufacturing: Opportunities and Challenges for Passive Microwave Components in Telecommunications and Defense Bülent Alıcıoğlu, Asartech ARGE Tasarım Mühendislik, Türkiye |
16.00– 16.30 | COFFEE BREAK and POSTER SESSION | |
SESSION A7 HALL A – Additive Manufacturing Software and Applications Chair: Assoc. Prof. Atilla Savaş, Piri Reis University, Türkiye |
SESSION B7 HALL B– Additive Manufacturing - II Chair: Dr. Sertaç Altınok, Turkish Aerospace Ind. Company, Türkiye |
|
16.30– 17.00 | Digitized Quality Inspection in Welding Production Role and Significance of the Software for the Development of Additive Manufacturing Technology Zuheir Barsoum, KTH Royal Institute of Technology, Sweden (INVITED LECTURE) |
Enhancing Texture in High Entropy Alloys with Nb: In In-Situ Synthesis and Microstructural Insights via Laser Powder Bed Fusion Isaqueo A. B. Moura, G. G. Ribamar, J. Shen, W. Zhang, T. S. Nunes, F. Zhang, J. P. Oliveira, Universidade NOVA de Lisboa, Portugal |
17.00– 17.30 | The Significant Role of Software Development for the Additive Manufacturing Technology Jonas Zielinski, Moduleworks GmBh, Germany (INVITED |
Welding and Characterization of P355GH Steel Used in Pressure Vessels Ismail Oguzhan Ayhan, Hakan Ateş, Gazi University, Ankara, Türkiye |
17.30– 18.00 | Non-Destructive Evaluation Approaches for Wire Arc Additive Manufacturing Ulaş Yaman, METU, Türkiye (INVITED LECTURE) |
A Method for Detecting Bead Geometry of Thin Thin-Wall Structural Aviation Components in Wire Arc Additive Manufacturing (ONLINE) Rostislav Palivoda, Transport and Telecommunication Institute, Latvia |
18.00– 18.30 | Investigating Slag Accumulation in Wire Arc Additive Manufacturing of High Strength Low Alloy Steel Malan Jayawickrama, Mattias Igestrand, Nicolas Coniglio, Paul Kah University West, Sweden Arts Et Métiers Institute of Technology, France |
Thermal Modeling of Tungsten Inert Gas Wire Arc Additive Manufacturing of Ti-6Al6Al-4V Alloy Mustafa Çağrı Özkader, Öncü Akyildiz and Cengiz Baykasoğlu,Hitit University,Ankara, TÜRKİYE |